What does Roof Maintenance Include?-A Review

The use of synthetic materials in the construction of commercial and residential roofs is common in general roof maintenance. A thermal insulation barrier, a waterproofing membrane, and a structural deck are the three main components. Polymer-based, rubber-based, asphalt-based, or metal-based materials are used to make them. The majority of polymers are thermoplastics, and roofing membranes are included in this category. These are relatively recent and have been lauded for their significant advantages over competing products. In reality, they combine the advantages of both PVC and EPDM with none of the disadvantages. Here is the official site.

Theoretically, TPOs are resistant to sunlight and UV while remaining heat-weldable. They are biodegradable, eco-friendly, and resistant to a wide variety of chemicals.


TPOs are said to exhibit more usual surface degradation signs the longer they are exposed to the atmosphere. Sheet shrinkage and millage losses are critical for general roof maintenance. Install degraded lead or zinc control strips if your roof has started to attract algae or moss.

Examine the whole flashing to ensure that it is free of holes and has not degraded. Keep algae from growing on the roof’s surface. Install zinc conrol strips along the ridges and hips if possible. The shingles that have been weakened should be replaced. Overhanging tree branches should be pruned. Keep the gutters clear of debris and conduct thorough water monitoring to ensure that the downspouts are draining properly.

Additional Safety Measures

Sealants and caulking should be checked on a regular basis as part of general roof maintenance. Damaged and weather-cracked caulking should be removed and scraped. Clean the region thoroughly. Use a wire brush if possible. Examine the mortar coating on parapet walls and chimneys, both above and below the brick. If it’s deteriorated or damaged, get it tucked-pointed.  Remove all debris from the roof, including that accumulated around pitch pans, pipes, HVAC devices, and other penetrations.